Optimization of Surface Roughness of AISI 1040 Stainless Steel in Milling Process Using Taguchi Method

Authors : Neslihan ÖZSOY, Murat ÖZSOY

Pages : 113-120

Doi:10.16984/saufenbilder.466053

View : 17 | Download : 6

Publication Date : 2019-02-01

Article Type : Research Paper

Abstract :Surface roughness significantly affects the work efficiency and life of machine parts interacting with each other. There are many parameters that affect surface roughness such as processed material, cutting tool, cutting parameters, cooling type. For this reason, optimization of the machining parameters and proper processing conditions are very important. In this study, the optimum machining conditions were determined by investigating the surface roughness of the milled AISI 1040 steel alloy depending on the feed per tooth insert ignore into journalissuearticles values(0.08 mm/tooth, 0.12 mm/tooth, 0.16 mm/tooth, 0.20 mm/tooth);, spindle speed insert ignore into journalissuearticles values(2000 rpm, 3000 rpm, 40000 rpm, 5000 rpm); and the cooling type insert ignore into journalissuearticles values(liquid, air); parameters. The Taguchi experimental design method was used to help achieve results at acceptable levels and to save time and cost in achieving optimal results. Experiments designed with the Taguchi method were based on the L16 orthogonal array and signal / noise insert ignore into journalissuearticles values(S/N); ratios were used in the evaluation of the experimental results. The optimum levels of the control factors for minimizing the surface roughness using S/N rates were determined. The optimal conditions for surface roughness were observed at A1B1C2 insert ignore into journalissuearticles values(i.e.,feed per tooth=0.08 mm/tooth and 2000 rpm spindle speed, cooling type=liquid);. Variance analysis was also conducted in the study. According to the results of analyses, it was found that spindle speed was the most significant parameter for surface roughness. Finally, confirmation tests were conducted to check the success of the optimization.
Keywords : Taguchi method, optimization, surface roughness, ANOVA