- Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Volume:23 Issue:4
- Cooling of the heated circular porous disc with a circular jet
Cooling of the heated circular porous disc with a circular jet
Authors : Mert GÜRTÜRK, Hakan F. OZTOP
Pages : 676-695
Doi:10.16984/saufenbilder.515687
View : 16 | Download : 7
Publication Date : 2019-08-01
Article Type : Research Paper
Abstract :In this study, an experimental analysis has been performed on jet impingement onto close-cell porous material which is the shape of a circular porous disc which is aluminum foam. This porous material was located on the circular heater and temperature distribution, local and average Nusselt number were observed at the different situations. Experiments were carried out by considering different parameters which are Reynolds number insert ignore into journalissuearticles values(1048, 2620, 4192);, the thickness of porous disc insert ignore into journalissuearticles values(6, 8, 10 mm); and heater power insert ignore into journalissuearticles values(3.6, 6.8, 10.5 W);. The results show that the maximum average Nu number value is calculated as 464.06 at Re = 4192, P = 10.5 W. It is observed that for the lowest average Nu number value is obtained at P = 3.6 W and Re = 1048 for without porous material. The lowest average Nu number value is calculated as 94.201. It is found that the porous materials can be used to control heat transfer.Keywords : Aluminum foam, jet impingement, heat transfer