Optimization of dissolved oxygen in the removal of wastewater generated in a sawmill using response surface methodology (RSM)

Authors : Uğur Özkan, Serkan Kardeş, Merve Cambazoglu, Halil Turgut Şahin

Pages : 213-219

Doi:10.18182/tjf.1442155

View : 49 | Download : 56

Publication Date : 2024-06-28

Article Type : Research Paper

Abstract :This study aims to optimize dissolved oxygen levels in treating wastewater generated during the sawmill drying process, using response surface methodology (RSM). The experimental approach, employing three independent variables centrifuge time, centrifuge RPM, and microwave power, evaluates their impact on the effectiveness of wastewater treatment based on dissolved oxygen levels. Parameter ranges are set at 5-20 minutes for centrifuge time, 15-35 for centrifuge RPM, and 100-250 Watts for microwave power. Optimization results reveal the highest dissolved oxygen value with a centrifuge time of 20.00 minutes, centrifuge RPM of 35.00, and microwave power of 100.00 Watts, yielding a maximum value of 9.85 mg/L. ANOVA analysis of the obtained data confirms the compatibility of the proposed model with experimental results (p<0.05), with R2 and R2 (adj) values calculated at 98.53% and 95.90%, respectively. These findings authenticate the reliability of the proposed model and its alignment with experimental data. In addition, the Lack of fit value obtained as a result of ANOVA analysis was found to be 0.075. Ultimately, response surface methodology (RSM) demonstrates potential contributions to optimizing dissolved oxygen in wastewater treatment experiments.
Keywords : Atıksu, Yanıt yüzey metodolojisi, Çözünmüş oksijen, Kereste fabrikası, Santrifüj