AN INVESTIGATION INTO THE EFFECT OF CRITICAL PARAMETERS ON RESIDUAL STRESS BUILD-UP IN THERMAL BARRIER COATING

Authors : B. Srivathsa, D.K. Das

Pages : 44-58

Doi:10.24107/ijeas.251245

View : 7 | Download : 5

Publication Date : 2015-03-01

Article Type : Research Paper

Abstract :Thermal barrier coatings insert ignore into journalissuearticles values(TBCs); are widely used on different hot components of gas turbine engines such as blades and vanes. Although, several mechanisms for the failure of the TBCs have been suggested, it is largely accepted that the durability of these coatings is primarily determined by the residual stresses that are developed during the thermal cycling. In the present study, the residual stress build-up in an electron beam physical vapour deposition insert ignore into journalissuearticles values(EB-PVD); based TBC on a coupon during thermal cycling has been studied by varying three parameters such as cooling rate, TBC thickness and substrate thickness. A two-dimensional thermo-mechanical plane strain finite element simulations have been performed for thousand cycles. It was observed that these variations change the stress profile significantly and stress severity factor increases non-linearly. Overall, the predictions of the model agree with reported experimental as well as simulated results.
Keywords : Thermal barrier coatings, residual stress, Modeling and simulation