Physicochemical Analysis and Heavy Metals Remediation of Pharmaceutical Industry Effluent Using Bentonite Clay Modified by H2SO4 and HCl

Authors : Abdulmumin ABDULLAHI, Joshua IGHALO, Oluwaseun AJALA, Stephen AYİKA

Pages : 727-744

Doi:10.18596/jotcsa.703913

View : 10 | Download : 5

Publication Date : 2020-10-30

Article Type : Research Paper

Abstract :Environmental pollution by industrial effluent has become an important issue partly because of the detection of heavy metals in them which need to be mitigated. Adsorbents were produced from Bentonite clay using 2 M H2SO4 and HCl as modifying agents in ratio 1:2 by wet impregnation method. Physicochemical properties of the pharmaceutical effluents such as pH, temperature, turbidity, conductivity, Chemical Oxygen Demand insert ignore into journalissuearticles values(COD);, Biological Oxygen Demand insert ignore into journalissuearticles values(BOD); and heavy metals were determined. High concentration of Feinsert ignore into journalissuearticles values(III); and Zninsert ignore into journalissuearticles values(II);were observed in the effluents when compared with standards. Optimal value of pH for Feinsert ignore into journalissuearticles values(III); and Zninsert ignore into journalissuearticles values(II); were 8 and 7 respectively and dose of 0.1 g was found to be optimal value for all the adsorption system. The adsorption was best fit to Langmuir isotherm and the pseudo second order kinetic model. The results obtained in this study showed that the produced adsorbents could be used to supplement the commercial adsorbents in the specific application. Furthermore, acid modification was helped to increase the sorption capacity of the clay to the heavy metals studied with H2SO4 being the better modification agent.
Keywords : pharmaceutical effluent, inorganic acid, bentonite clay, heavy metal, adsorption