A Comparative Study between Matrix Converter Fed InductionMotor Drive and Dual-Matrix Converter Fed Open-End WindingInduction Motor Drive

Authors : A. BELADEL, A. KOUZOU, A. HAFAIFA, Sedat SUNTER, D. MAHIA

Pages : 91-99

View : 11 | Download : 5

Publication Date : 2017-10-01

Article Type : Research Paper

Abstract :This paper deals with a comparative study between the control of three to three phase matrix converter feeding a star-connected three phase induction machine and the control of three to three phase dual matrix converter feeding an open-end winding induction machine. The control strategy used in both cases is based on a proposed direct transfer function control approach of Venturini algorithm which allows to obtain a unity power factor at the input side to boost the output phase voltage up to 150% compared to the input phase voltage, while keeping the main advantage of the matrix converter by providing a fully bidirectional power flow operation. The main objective of using the open-end winding topology is to ensure the minimization of the common mode voltage which is clearly observed in the case of star-connected winding. Simulation results are presented under both control strategies, where both matrix converters are supplied from the same three-phase power source. Whereas; the two output voltage system of the dual matrix converter are shifted with 180 degrees. Based on the obtained results the performances of the both control approaches are technically discussed.
Keywords : Matrix converter, Dual matrix converter, Direct transfer function approach, Simulation Model, Open EndInduction Machine Drive