The Effect of Aluminium Injection Parameters on the Mechanical Properties of the Material Produced by High Pressure Die-Casting

Authors : Emre AKKAYA, Yunus KAYIR

Pages : 421-430

Doi:10.29109/gujsc.1211920

View : 67 | Download : 69

Publication Date : 2023-06-23

Article Type : Research Paper

Abstract :Aluminium is one of the basic materials used in many sectors, especially in automotive, defence and aviation. Generally, aluminium parts are manufactured by using injection molding methods in many sectors, such as automotive, etc. Injection presses that are used for die-casting material have a lot of parameters, affect the molded parts’ properties. In this study, the effect of injection parameters on the mechanical properties was investigated. Firstly, a test part that is shaped currently on the injection press machine in a sector was found out. An aluminum alloy, named Al〖Si〗_12 Cu insert ignore into journalissuearticles values(EN AC 47000);, that is used widely in die-casting techniques was preferred. Three injection parameters, such as, injection velocity insert ignore into journalissuearticles values(m/s);, time of the mold opening insert ignore into journalissuearticles values(s); and molten metal temperature insert ignore into journalissuearticles values(0C);, were selected. And all works were planned with the full factorial experimental design method. Thus, the test parts were manufactured by using an injection molding machine. Moreover, many tests, such as hardness and tensile, were performed on the test parts to investigate the effect of injection parameters on the mechanical properties of the material. The tests were analysed with the full factorial and ANOVA method. As a results of the analysis, the highest hardness value was obtained as 85 HB when the molten metal temperature was 750 ℃, the injection velocity was 1.3 m/s, the mold opening time was 10 s, and the highest breaking strength was obtained as molten metal temperature 725 ℃, injection velocity 4 m/s, when the mold opening time was 12 s was found to be 264 MPa.
Keywords : Aluminium, high pressure die casting, factorial design, mechanical properties, design of experiment, analysis of variance